Diagnostic information 2-19
5060-4xx
2D 1D Fuser exit sensor obstructed.
2D 1E Duplex sensor(s) obstructed.
2D 1F Tray 2 sensor obstructed.
2D 20 Tray 3 sensor obstructed.
2D 21 Tray 4 sensor obstructed.
2D 22 Pass thru sensor in Stacker 1 obstructed.
2D 23 Pass thru sensor in Stacker 2 obstructed.
2D 24 Pass thru sensor in Stacker 3 obstructed.
2D 25 Pass thru sensor in Stacker 4 obstructed.
2D 26 Pass thru sensor in Stacker 5 obstructed.
2D 27 Pass thru sensor in Stacker 6 obstructed.
2D 28 Paper jam detected. A paper jam detected in the Duplex option.
2D 29 Paper jam detected. A paper jam detected in Tray 2.
2D 2A Paper jam detected. A paper jam detected in Tray 3.
2D 2B Paper jam detected. A paper jam detected in Tray 4.
2D 2C Duplex input motor error detected, the engine detected a stall condition.
2D 2D Duplex input motor error detected, the engine detected a PWM error.
2D 2E Duplex input motor error detected, the engine detected a motor encoder error.
2D 2F Duplex reversing motor error detected, the engine detected a stall condition.
2D 30 Duplex reversing motor error detected, the engine has detected a PWM error condition.
2D 31 Duplex reversing motor error detected, the engine detected a motor encoder error.
2D 32 Tray 2 pick motor stall error detected.
2D 33 Tray 2 pick motor PWM error detected.
2D 34 Tray 2 pick motor encoder error detected.
2D 35 Tray 2 feed motor stall error detected.
2D 36 Tray 2 feed motor PWM error detected.
2D 37 Tray 2 feed motor Encoder error detected.
2D 38 Tray 3 pick motor stall error detected.
2D 39 Tray 3 pick motor PWM error detected.
2D 3A Tray 3 pick motor Encoder error detected.
2D 3B Tray 4 feed motor stall error detected.
2D 3C Tray 4 feed motor PWM error detected.
2D 3D Tray 4 feed motor Encoder error detected.
Sub error code Explanation
To Next Page
Loading...
