2-26 Service Manual
5060-4xx
Format Disk To format the printer hard disk.
Warning: Do not turn off the printer while
the hard disk is formatting.
Yes Deletes any data stored on the hard
disk and prepares the device to
receive new resources.
No Cancels the request to format the hard
disk and leaves current resources
stored on the disk.
Format Flash To format the flash memory.
Warning: Do not turn off the printer while
the flash is formatting.
Yes Deletes any data stored in flash
memory and prepares the flash
memory to receive new resources.
No Cancels the request to format the flash
memory and leaves current resources
stored in flash memory.
Hex Trace To help isolate the source of a print job problem. With Hex Trace selected, all data sent to the printer is
printed in hexadecimal and character representation. Control codes are not executed.
To exit Hex Trace, turn the printer off or reset the printer from the Job Menu.
Job Acct Stat To print a listing of all job statistics stored
on the hard disk, or to clear all statistics on
the disk.
Print Prints all statistics available for the
most recent print jobs.
Clear Deletes all accumulated job statistics
from the hard disk.
Print Directory To print a list of all the resources stored in flash memory or on the hard disk.
Note: Print Directory is available only when either a nondefective flash or disk is installed and
formatted, and Job Buffer Size is not set to 100%.
Print Fonts To print a sample of all the fonts available
for the selected printer language.
PCL Fonts Prints a sample of all printer fonts
available for PCL emulation.
PS Fonts Prints a sample of all printer fonts
available for PostScript emulation.
Print Menus To print a listing of the current user default values, the installed options, the amount of installed printer
memory, and the status of printer supplies.
Print Net <x>
Setup
To print information relating to the internal print server and the network settings defined by the
Network <x> Setup menu item in the Network Menu.
Menu Item Purpose Values