Lexmark MS711 User Manual

Use To
Paper Saver Border
None
Solid
Print a border on each page image when using N‑Up (pages per side).
Notes:
• None is the factory default setting.
• This setting affects jobs if the value of the Paper Saver setting in the same
menu is not set to Off.
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Specify the positioning of multiple‑page images when using N‑Up (pages per side).
Notes:
• Horizontal is the factory default setting.
• Positioning depends on the number of page images and whether they are in
portrait or landscape orientation.
• This setting affects jobs if the value of the Paper Saver setting in the same
menu is not set to Off.
Separator Sheets
Off
Between Copies
Between Jobs
Between Pages
Specify if blank separator sheets are inserted.
Notes:
• Off is the factory default setting.
• Between Copies inserts a blank sheet between each copy of a print job if
Collate is set to “(1,2,3) (1,2,3).” If Collate is set to “(1,1,1) (2,2,2),” then a
blank page is inserted between each set of printed pages, such as after all page
1's and after all page 2's.
• Between Jobs inserts a blank sheet between print jobs.
• Between Pages inserts a blank sheet between each page of the print job. This
setting is useful when printing on transparencies or when inserting blank pages
in a document for notes.
Separator Sheet Source
Tray [x]
Manual Feeder
MP Feeder
Specify the paper source for the separator sheet.
Note: Tray 1 is the factory default setting.
Blank Pages
Do Not Print
Print
Specify if blank pages are inserted in a print job.
Note: Do Not Print is the factory default setting.
Understanding printer menus 119

Lexmark MS711 Specifications

General

Brand	Lexmark
Model	MS711
Category	Printer
Language	English