Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 209
Measurement Illustration
X Angle
Determines the angle the hole relative to the Xaxis.
Cone
Counterbore
Y Angle
Determines the angle of the hole relative to the Y axis.
Counterbore Depth
Determines the depth of a counterbore.
Axis Tilt
Measures the tilt of the axis of the hole relative to the surface surrounding the hole.
This measurement is not supported when Shape is set to
Counterbore.
Axis Orientation
Measures the angle of the axis of the hole around the normal of the surface
surrounding the hole, relative to the X axis.
This measurement is not supported when Shape is set to
Counterbore.
To Next Page
Loading...
