DDNS Setup (Advanced)
19
1. From your LOREX account, click the DDNS tab.
2. Click Set up a New DDNS.
3. Select your DVR warranty from the dropdown next to Warranty. Enter the rest of your
product information.
NOTE
• The Device Name can be any name of your choice (for example, “Store Security System”).
• You can find your DVR’s MAC Address in the system information window on the DVR. Click
on the Taskbar to open the system information window.
4. Click Add Device.
Once submitted, your DDNS account information will be summarized under My DDNS
Devices. Make a note of your DDNS URL, Username and Password, as they will be
needed to complete DDNS setup.
19.6 STEP 6: Enable DDNS on the DVR
For full instructions, see 12.2.18 Configuring DDNS Settings, page 68.
19.7 STEP 7: Connect to the DVR’s DDNS Address
Prerequisites:
• Install FLIR Client 12 on a remote computer. See 13 FLIR Client 12 for PC / Mac, page
91 for details.
To login using the DDNS address:
#LX400086; r. 1.0/39246/39246; en-US
144
To Next Page
Loading...
Need help?
General