Using the Remote Control
6
You have the option of controlling your security system using the included remote control
instead of the included mouse, which is intended as the primary way of controlling the sys-
tem (for details, see 5 Using the Mouse, page 13).
To use the remote control:
1. Number Keys (1~0): Press to select the desired channel in Full-screen View.
•
: In Live Viewing Mode, press to open Split-screen View. Press repeatedly to
switch between split-screen viewing modes.
• MENU/ESC: Press to open the Main Menu. In menus, press to go back / exit
menus.
• 0: Press 0 three times set the DVR’s video output to the default resolution of
1280×1024.
2. Navigation Cursors: Press to navigate menus.
•
: Press to select menu items. In Live Viewing Mode, press to access System
Information.
3. Sub Menu: Press to open the Menu Bar.
4. ID: Used to pair the remote control to a specific DVR. For details, see 12.5.11 Setting
the Remote ID, page 85.
5. MUTE: Press to mute/un-mute audio during Live Viewing and Playback Mode. Audio-
capable cameras (not included) are required for audio recording and listen-in audio
functionality.
#LX400086; r. 1.0/39246/39246; en-US
14
To Next Page
Loading...
Need help?
General