Using the Main Menu12
1. Under Advanced, click Maintenance to open the Maintenance tab.
2. Click Save Settings.
3. The drive menu appears and displays the contents of the USB flash drive. Navigate to
the folder you want the system settings file to be saved in, then click OK to begin. The
progress bar at the bottom of the window shows you the progress of the backup.
NOTE
• For more details on using the drive menu, including a full overview of buttons and their functions,
see 10.1 Drive Menu Controls, page 32.
• See 12.6.4 Importing System Settings, page 88 for instructions on importing saved system
settings.
12.6.4 Importing System Settings
Once you have created a system settings export (see 12.6.3 Exporting System Settings,
page 87for details), you can import the settings on another DVR.
Prerequisites:
• You must connect a USB flash drive to one of the DVR’s USB ports.
• The connected USB flash drive must have a system settings file saved on it. See 12.6.3
Exporting System Settings, page 87 for full instructions on saving settings to a USB
flash drive.
To import system settings:
#LX400086; r. 1.0/39246/39246; en-US
88
To Next Page
Loading...
Need help?
General