Using the Main Menu12
1. Under Settings, click Display, then click on the Video Out tab.
2. Use the dropdown next to SEQ Mode to set how many channels appear on screen at
a time while Sequence Mode is enabled.
3. Click the field next to SEQ Dwell Time to enter how many seconds (1–300) each
channel or group of channels is shown on screen before cycling to the next channel or
group.
4. Click Save.
12.2.8 Configuring Privacy Zone(s)
A privacy zone blocks out a portion of the camera image with a black box, letting you
have privacy in certain parts of a camera image. You can configure up to 4 privacy zones
per channel.
CAUTION
Areas covered by privacy zones will not be visible in video recordings.
To configure privacy zone(s):
#LX400086; r. 1.0/39246/39246; en-US
56
To Next Page
Loading...
Need help?
General