Using the Main Menu12
NOTE
The instructions in this section are using VLC Media Player. VLC Media Player is a free software provided
at www.videolan.org. FLIR cannot provide support for VLC Media Player or any other 3rd party software.
Please contact the software vendor for technical support related to 3rd party software applications.
To connect to the video stream using VLC Media Player:
1. Under Settings, click Network, then click on the RTSP tab.
2. Select Enable from the dropdown next to RTSP Enable.
3. Select Enable from the dropdown next to Verify.
4. If needed, click the field next to RTSP Port to change the port number.
5. Click Save.
6. Open VLC on a computer in the same network as your DVR.
7. Click Media, then click Open Network Stream....
#LX400086; r. 1.0/39246/39246; en-US
70
To Next Page
Loading...
Need help?
General