Using the Main Menu12
12.6.6 Using Automatic Firmware Upgrade
The system supports automatic firmware upgrades when connected to a router or switch
on your network using the included Ethernet cable. When a new firmware version be-
comes available, the system is set to automatically download the firmware file from the In-
ternet and displays a pop-up on the DVR’s on-screen display.
If your DVR has been disconnected from the Internet for a while, you can push the system
to check for any firmware upgrades it may have missed.
Prerequisites:
• Your DVR must be connected to your router or a switch on your network using the in-
cluded Ethernet cable so the system can access the Internet.
To check for new firmware:
1. Under Advanced, click Auto Upgrade to open the Auto Upgrade tab.
2. Click Check FW to search for newer firmware. If a newer version is available, a notifi-
cation appears asking if you want to upgrade the firmware.
#LX400086; r. 1.0/39246/39246; en-US
90
To Next Page
Loading...
Need help?
General