Using the Main Menu12
5. Use the dropdown next to Record Time to select Enable to show timestamps in re-
cordings, or Disable to hide them.
CAUTION
By default, the system is set to show timestamps in video recordings. It is highly recommended to
show timestamps in recordings for legal reasons.
6. Click Setup next to OSD Position to change where the timestamp and channel name
appear on screen. Click-and-drag the timestamp and/or channel name to change their
position on screen.
7. Click Save.
8. (OPTIONAL) Use the Copy function to copy your settings to another or all connected
cameras. See 12.1.1 Copying Channel Settings to Another Channel, page 49 for de-
tails on using the copy function.
12.2.2 Adjusting Camera Image Color
Adjust hue, brightness, contrast and saturation of a camera’s image.
To adjust image color:
1. Under Settings, click Display, then click on the Live tab.
#LX400086; r. 1.0/39246/39246; en-US
51
To Next Page
Loading...
Need help?
General