Search & Backup
10
9. The backup drive menu appears (see 10.1 Drive Menu Controls, page 32 for an over-
view of drive menu controls).
• Navigate to the folder you want the backup files to be saved in.
• Click OK to begin.
• The progress bar at the bottom of the window shows you the progress of the
backup.
• Once complete, your backup files are shown on the drive menu.
10.6 Picture Search — Quick Backup
A Quick Backup lets you save all the snapshots which were captured in a set time period
without having to select individual files to back up.
Prerequisites:
• To back up events, you must connect a USB flash drive to one of the DVR’s USB ports.
• You must have enabled Auto or Manual Capture, or the system will not return any snap-
shot results. To set up Auto Capture, see 12.2.12 Configuring Auto Capture, page 61.
To set up Manual Capture, see 12.2.14 Enabling Manual Capture, page 63
To perform a Quick Backup for snapshots:
#LX400086; r. 1.0/39246/39246; en-US
41
To Next Page
Loading...
Need help?
General