FLIR Client 12 for PC / Mac
13
3. Click the switches next to the system menus to you would like to include (
) or dis-
card (
) from the reset, or click All to reset all menus.
4. Click Save to confirm. The DVR will reboot automatically.
13.6.30 Configuring System Event Settings
Set notification options for HDD events, warnings and video loss.
To configure system event settings:
1. Click Remote Setting in the top-right corner of the window.
2. Under Advanced, click Events to open the Events tab.
3. Select the type of event to configure from the dropdown next to Event Type.
4. Click the switch next to Enable to enable (
) or disable ( ) the selected event
type.
5. Use the dropdown next to Buzzer to select whether you would like the DVR to make
an alarm sound if the selected event occurs.
6. Click the switch next to Show Message to enable (
) or disable ( ) on-screen
messages for the selected event type.
7. Click the switch next to Send Email to enable (
) or disable ( ) email notifica-
tions for the selected event type.
8. Click Save.
9. (OPTIONAL) Click Copy to copy your event settings to another event type.
10. (OPTIONAL) Check the event types you would like to copy your settings to, or check
All to copy to all event types, then click OK.
11. Click Save again.
#LX400086; r. 1.0/39246/39246; en-US
122
To Next Page
Loading...
Need help?
General