Lorrca MaxSis Program
Lorrca Maxsis User Manual Page 99
Version 5.04 MRN-231-EN
Result parameter Description
limit given in <Settings<Max Error Of Fit>.
Eof Error Of Fit. Root of mean square sum of 300
syllectogram samples uniformly spaced on a logarithmic
time scale. This parameter gives an indication of the
goodness of fit.
Ir RBC-shape recovery contribution
(r = recovery).
Tr RBC-shape recovery time constant.
If RBC-rouleaux formation contribution
(f = fast).
Tf RBC-rouleaux formation time constant.
Is RBC-3D aggregate formation contribution
(s = slow).
Ts RBC-3D aggregate formation time constant.
I0 Syllectogram base level.
Iteration
Isc max Highest back-scatter intensity found during the iteration
procedure. N.B. This is not the same as "Isc top"
obtained from the syllectogram!
g at Isc max Shear rate at which "Isc max" was found.
dIsc min Minimum change in back-scatter intensity found during
the iteration procedure (when intermediate
disaggregation is enabled). The change in back-scatter
intensity is determined with respect to the intensity
during the preceding disaggregation period.
g at dIsc min Shear rate at which "dIsc min" was found
To Next Page
Loading...