Introduction
Page 12 Lorrca Maxsis User Manual
Version 5.04 MRN-231-EN
2. INTRODUCTION
2.1. About this manual
This manual describes all necessary procedures and information required for the correct and
successful use of the Lorrca® MaxSis, covering:
Installation
Normal operation
User maintenance
Troubleshooting
This manual does include details about possible errors, listed in the chapter troubleshooting. Here
a description can be found about known errors of the instrument. If other errors occur, which are
not mentioned in this section, please contact our service department.
RR Mechatronics retains the right to make any changes to the contents without any previous
warning. Check our website for the latest version of this manual http://www.rrmechatronics.com.
For information concerning settings, repair and maintenance which is not mentioned in this
manual, please contact RR Mechatronics.
Any remarks or suggestions will be gratefully received. RR Mechatronics accepts no liability for any
mistakes in this User Manual, nor for the consequences of any faulty interpretation of text or
drawings.
Read the whole Manual through carefully, especially chapter Safety
(on page 28), before using the instrument.
The section LoRRca MaxSis Program (on page 51) is interactive
and most of the software functions are the same as in the program
itself.
To Next Page
Loading...