Safety
Page 30 Lorrca Maxsis User Manual
Version 5.04 MRN-231-EN
4.2. Electrical safety
The instrument has protective covers, which prevent direct access to the inner parts of the
instrument.
Use only the original delivered main power cord or exact equivalent
The protective covers have the sign:
WARNING: Ensure that covers are closed during normal use.
Always connect to grounded wall sockets.
Set the main switch to the "0" position before opening and/or closing the covers!
Work and/or measurements on the mains power section and other control parts may only be carried out
by properly trained personnel.
To Next Page
Loading...