Lorrca MaxSis Program
Page 88 Lorrca Maxsis User Manual
Version 5.04 MRN-231-EN
6.9. Cell Membrane stability screen
This screen appears when starting a stability test. See Stability test (on page 62) Settings for
details on the Settings parameters that influence the measurement.
The cell membrane stability test consists of 3 stages.
A measurement starts after subsequently clicking <N
EW...(F1)>.
On this screen are shown:
1. Coloured diffraction pattern.
2. Curve display screen.
3. Indication of cell shape.
4. Measurement and sample details.
5. Measurement results.
To Next Page
Loading...