Installation
Page 40 Lorrca Maxsis User Manual
Version 5.04 MRN-231-EN
5.3. Environmental conditions and setting up the instrument
5.3.1. Conditions
The instrument should be set up on a flat table, level and with sufficient room around it. (see Table
size and or Unpacking/Setting Up (on page 41) for dimensions).
For good operation, the CUP, BOB, bottles, keyboard and mouse should be easily seen and easy
to reach.
It is necessary that the locking protection covers are fully accessible for adjustment and repairs.
WARNING: Always connect to grounded wall sockets.
In order to ensure fault-free operation of the instrument, it is essential that the room where it is
located is temperature controlled.
(The temperature may not be less than 15 °C, nor exceed 35 °C). Keep the area around the
instrument clean and free of dust.
To Next Page
Loading...