General operation procedure
Page 116 Lorrca Maxsis User Manual
Version 5.04 MRN-231-EN
7.4.5. Start new measurement
After a measurement has completed and the report is printed (yes/no)
Press the <YES> for printed report.
Press the <NO> if no report is required.
Screen E
MPTY CUP appears.
1. Press <C
LEAN>
2. Open the hood.
3. After a measurement on whole blood use the automated rinse cycle and simultaneous rinse the
funnel with a spray bottle with de-ionized water to clean and empty the CUP.
To Next Page
Loading...