Lorrca MaxSis - Stability Curve Determination Screen

Lorrca MaxSis Program
Lorrca Maxsis User Manual Page 85
Version 5.04 MRN-231-EN
6.8. Stability Curve determination screen
This screen appears when starting a stability test. See Stress curve determination (on page 61)
for details on the Settings parameters that influence the measurement.
A measurement starts after subsequently clicking <N
EW...(F1)>.
On this screen are shown:
1. Coloured diffraction pattern.
2. Curve display screen.
3. Indication of cell shape.
4. Measurement and sample details.
5. Measurement results.