Maintenance
Page 170 Lorrca Maxsis User Manual
Version 5.04 MRN-231-EN
10.10.3. Replace the main fuses
The instrument is standard
equipped for 230VAC , if the
power voltage is 115VAC
another fuse has to be placed
(see ID-plate)
Pull the fuse holder in the main power
entrance module open with a screwdriver or
other flat tool.
The main power entrance is located on the
rear side.
Replace both fuses with the appropriate
type, as indicated on the type label
Push the fuse holder back into the power
entrance module.
To Next Page
Loading...