General operation procedure
Page 144 Lorrca Maxsis User Manual
Version 5.04 MRN-231-EN
7.10. Powering down
CAUTION: Never turn off the main switch when the instrument is
running. Always wait until the instrument has completed its cycle.
Go to HARDWARE CHECK -
>L
ORRCA IO
Press <RINSE CUP>.
Press <RINSE GRADIENT
PUMP
>.(If available)
Dry CUP and BOB. Do not
scratch the CUP!
Exit software.
End of day wash (on page
142) (see further in this
chapter)
Switch OFF the LoRRca.
Switch OFF the PC and
printer.
Empty the waste bottle.
To Next Page
Loading...