EasyManua.ls Logo

Lorrca MaxSis - Estimated RBC in Laser; Oxygenscan Whole Blood Volume Calculation; Performing Osmoscan

Lorrca MaxSis
229 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
General operation procedure
Page 104 Lorrca Maxsis User Manual
Version 5.04 MRN-231-EN
7.2.3. Estimated RBC in laser
The couette volume uses 1 milliliter resulting in 100 / 5 = 20 * 10
6
RBC in the couette system
The suspension volume in the laser beam = 0,5 microliter
The diffraction pattern uses (20 * 10
6
/ 1000) * 0,5 = 20.000 RBC
7.2.4. Oxygenscan whole blood volume calculation
Measure RBC level CBC on a Cell Counter.
250/RBC = xx µL blood in 5 ml Oxy ISO
RBC in 10
6
/µl or RBC in 10
12
/l
this should result in a value between 50 and 250 µl depending on the level of anemia
7.3. Performing Osmoscan
Start software
In case of starting Osmoscan measurements after other tests: Perform a prime step with
corresponding Lorrca reagent first:
1. Check that all tubes are connected correctly to the Osmo HIGH and Osmo LOW, water and
waste bottles

Table of Contents