General operation procedure
Lorrca Maxsis User Manual Page 129
Version 5.04 MRN-231-EN
Screen EMPTY CUP appears.
1. Press <C
LEAN>
2. Open the hood.
3. After a measurement on whole blood use the automated rinse cycle and simultaneous rinse the
funnel with a spray bottle with de-ionized water to clean and empty the CUP.
4. Press <F1> or click on N
EW...F1 to perform another measurement.
or
Press <
MAIN MENU> to perform other tests (perform in that case also an “END OF DAY WASH (on page
142)”).
or
Exit the software and perform an “E
ND OF DAY WASH (on page 142)”.
To Next Page
Loading...