Lorrca MaxSis - Page 197

Appendix for Lorrca® MaxSis
Lorrca Maxsis User Manual Page 195
Version 5.04 MRN-231-EN
5.01 August 2014 Instrument
description
 Intended use
changed
H. Schavemaker
5.00
September
2013
All
 Addition of chapter
operation, contents
taken out from
chapter Program
H. Schavemaker
4.03 May 2013 Maintenance
Adjustments and
replacements
 Pump tube
replacement
 Labels changed
H. Schavemaker
4.02 February 2012 Technical specs
Reagents
 Shear rate is
changed from 3500
to 800
 PVP handling items
 Calibration is not
applicable for the
LoRRca and all
issues are removed
out of the manual.
H. Schavemaker
4.01 January 2012
 Yearly update and
publishing
H. Schavemaker
4.00 November 2011 Introduction
Safety
 General chapter
structure
 Review of safety
items
H. Schavemaker
3.01 January 2010 Trouble shooting

A
dd service request
protocol in trouble
shooting.
H.E. van Dijk
3.00 January 2010 All
 This version of the
Manual is an
extension and
adaptation of the
Lorrca manual
version 2.1 written
by J.G.G. Dobbe
(AMC).
H.E. van Dijk
Preliminary November 2009 All Start of he manual H.E. van Dijk