Lorrca MaxSis - Page 67

Lorrca MaxSis Program
Lorrca Maxsis User Manual Page 65
Version 5.04 MRN-231-EN
Settings parameter Description Range
sorting the measurement points, and if intermediate
disaggregation is not enabled, it is possible to study
memory effects (hysteresis) of RBC aggregation vs.
shear rate.
Iteration shear rates
Presets values to which the iteration procedure is
performed. Default values are applicable for human
RBC’s.
Press <E
DIT> to change the values.
[1, 7745] 1/s
6.4.4.3.1. Edit Iteration shear rates