Rigging work
12.1 Rigging work checklists for crane operation with the main boom
Operating manual GMK 6400 3 112 993 en 12 - 7
12.07.2013
10. Remove anemometer and the air traffic control light; Ã p. 12 - 132
11. Remove camera on main boom;
à Camera on main boom, p. 12 - 137.
Lower the slewable spotlights;
à p. 11 - 109
12. Retract the outriggers;
à CHECKLIST: Retracting the outriggers,
p. 12 - 31
13. Activate (unlock) the suspension.
The symbol (1) must be green (suspension on);
à p. 5 - 15
14. Turn off the engine and, if necessary, remove the hand-held control and
stow it away in the driver's cab;
à Disconnecting the hand-held control,
p. 12 - 22
15. When the truck crane is no longer being used;
à In case of work breaks
of more than 8 hours
, p. 11 - 129