Malfunctions during crane operation
14.4 Troubleshooting
Operating manual GMK 6400 3 112 993 en 14 - 29
12.07.2013
s
801 1 Rigging state unconfirmed à Confirming the rigging mode,
p. 11 - 29.
802 2 RCL overridden Cancel override;
à p. 11 - 40
803 3 Slewing gear switched on
with RCL code for working
position
0°, 180° or Free on
wheels
Switch off the slewing gear
814 1 Maximum permissible
overall height exceeded
1)
Retract or lower
814 2 Maximum permissible
overall working radius
exceeded
1)
Raise or retract
814 3 Maximum permissible
overall slewing range
exceeded
1)
Slew into a permissible working
range
814 4 Shutdown area of a moni-
tored object reached
1)
Move into a permissible working
range
817 2 Rigged outrigger span not
correct
Check the outrigger span and rig the
required outrigger span
817 3 Current outrigger span not
permissible
Check the outrigger span and rig the
required outrigger span
817 4 Position of the auxiliary
supports is not permitted
Check the position of the auxiliary
supports and correct if necessary
Error code Cause Solution
1)
With working range limiter switched on
To Next Page
Loading...
