Special Imaging Modes
11-31
11.2.1 Enter or Exit iScape
To enter iScape mode,
z Move the cursor onto [iScape] item in the Other menu, and press <Set> key;
To enter the iScape mode via a user-defined key,
z Assign a key (F1 through F10, or left & right keys of footswitch) as user-defined
iScape panoramic imaging.
The setting path is “Setup → System → Key Config”. Refer to section 17.2 for details.
z Press the user-defined iScape panoramic imaging key to quickly enter the mode.
To exit iScape mode,
z If in the capture status, click [Exit] in the menu; or press the [Esc] key.
z If in the review status, press [Esc] to exit to the capture status, and then press [Esc]
again to exit iScape mode.
11.2.2 Capture Images
1 To enter the iScape capture mode,
z Move the cursor onto the [iScape] item in the Other menu and press <Set>
key; or
z Press the user-defined iScape panoramic imaging key on the control panel.
2 Press the [Update] key or use the soft menu control to click [Start iScape] to start the
iScape image capture.
3 Scan slowly and in a uniform motion lengthwise, end-to-end (with or against the
transducer orientation mark), to obtain a single extended field of view image.
4 Press the [Update] key or [Freeze] key or use the soft menu control to click [Stop
iScape] to end the image capture and freeze the screen. The image splicing starts.
After the acquisition is complete, the extended image will be displayed. The iScape
review mode is entered.
5 To exit the iScape review or enter the capture mode to recapture images,
z Press the [Freeze] key; or
z Press the [Esc] key; or
z Select [Return to Capture] in the menu.
6 To exit iScape in the iScape capture mode,
z Press the [Esc] key; or
z Press the [B] key; or
z Press the user-defined iScape panoramic imaging key.
11.2.3 Review the Extended Image
After completing the image capture, you can piece images together and then enter the
iScape review mode.
Rotate extended image
In the iScape Review mode, click [Rotation] in the menu to rotate the extended image
clockwise or counterclockwise.
To Next Page
Loading...
Need help?
General
