Cine Review
12-2
When you review images until the first or the last frame, further rolling the trackball will
display the last or first frame.
The cine progress bar at the bottom of the screen (as shown in the figure below): the
whole bar represents the total frame number. The two numerals in the lower right corner
respectively indicate the current frame number and the total frame number. The slider
indicates the frame position currently reviewed.
12.2.2 Auto Cine Review
1 In the manual cine review, use the soft menu control to click [Auto Play] in the menu to
activate auto cine review.
2 In the auto cine review, use the soft menu control to click [Auto Play] in the menu to
adjust the review speed. When the speed is changed to 0, the system exits the auto
cine review.
3 In the auto cine review, rolling the trackball will stop the auto cine review and enter to
the manual cine review.
12.3 Cine Review in the M or D Mode
Enter the cine review in the M or D mode, and then roll the trackball, the cine images are
displayed on the screen one by one. Roll the trackball to the left, the review progress
slider moves to the left, the images moves to the right, and the earlier stored images are
invoked. Whereas, roll the trackball to the right, the review progress slider moves to the
right, and the images move to the left, the recently stored images are invoked. When you
review the images until the earliest or the latest frame, further rolling the trackball will not
move the image leftward or rightward.
The cine review progress bar is displayed at the bottom of the screen (as shown in the
figure below). The two numerals in the lower right corner respectively indicate the current
time and the total time.
To switch between Auto Cine and Manual Cine, the method is identical to that of the B or
C mode.
12.4 Linked Cine Review
In dual live status, the linked cine review refers to review of the images captured at the
same moment. You can perform the linked cine review in the following modes:
z B + M
z dual live mode (B + Color or B + Power)
z duplex mode (B + PW)
z triplex mode (B + PW+ Color or B + PW+ Power)
In the statuses rather than the dual live, you can only review images in the currently active
window.
Refer to sections 12.1 through 12.3 for cine review operations. However, the images in
the linked cine review are displayed synchronously in B + M, B + Color, B + Power, B +
PW, B + PW+ Color or B + PW+ Power mode.
To Next Page
Loading...
Need help?
General
