To Next Page

To Previous Page

Comments (Annotations)

14-3

 Changing Language

Click [English] to turn on or off the English comments. If turning on the English comments,

the comments will display in English; if turning off the English comments, the comments

will display in the language you set in the preset.

If the current language is English, the language selection is not available.

 ABC Display

Click [ABC Display] to display or hide the added comments. Assign the user-defined key

for the function in “[Setup] → [System Preset] → [Key Config]”.

 Delete a word or all comments

Click [Erase All Text] to delete all texts.

Click [Delete Word] to delete the word in the reserved order.

14.3 Adding Comments

14.3.1 Typing Comment Characters

You can perform the following operations either in the comment status or in the other

statuses.

1 To set the comment location,

Roll the trackball or press [→], [←], [↑], [↓] key to move the cursor to the desired

location for comments.

2 To type the alphanumeric characters,

z Type the alphanumeric characters through the qwerty (The default

characters are uppercase);

z To type the upper characters, press [Shift] and the character key at the

same time.

3 New line:

In the edit status (the characters are in green color), press [Enter] to move the cursor

to the new line, and the location of the cursor is aligned with that of the first line.

4 In the edit status, press <Set> or [Enter] to confirm the character added, and the

color of the character added turns to yellow.

14.3.2 Adding a Comment Text

1 Enter the comment status and set the comment location. The method is the same as

that mentioned above.

2 Rotate the [Multifunction] knob to display the comment texts one by one in the current

exam mode.

3 Or press [Menu] key and the comment text library menu of the current exam mode will

be displayed on the left side of the screen. You can navigate to the comment text library

menus for other exam modes.

4 To select the comment text:

Move the cursor onto the desired comment text on the menu and press <Set>, the

Mindray DC-3 User Manual

Questions and Answers: