Patient Data Management
16-17
2. Select the data to be backed up, click [Send To] or [Backup] button in the screen
(such as the [iStation] screen).Select the target drive in the Send To or Back Up
Patient Record dialogue box.
3. Click [OK] or [Backup] button in the file-exporting screen.
4. After the writing process is completed, click
to pop up the Disc Option dialogue
box, and select [Eject] to eject the CD/DVD.
To erase data from a CD/DVD
1. Double-click the
symbol to pop up the Disc Option screen, as shown in the
figure below.
2. Click [Erase] to erase data from a CD/DVD.
3. After the erasing process is completed, click [Eject] in the Disc Option dialogue box.
Tips:
z Writing data using “Send To” supports PC format transfer function, while CD/DVD
written by “Backup” supports only system-relevant formats.
z The symbol indicates that the input CD/DVD is damaged or with data of
wrong format.
CAUTION
1. During the backup process, if a CD/DVD is forcibly taken
out or you perform other operations, the backup process
will fail or the system may malfunction.
2. You must use [Eject Disc] button to take out the DVD disk
before disconnecting the DVD-writer. Otherwise you may
damage the DVD disk or lose data.
NOTE: Directly removing a DVD-RW/DVD+RW drive may result in the damage of drive
and/or the system, please refer to 5.9 Connecting/Removing a USB Memory
Device for disconnection.
16.8 Task manager
Click or at the lower right corner of the screen to pop up the following dialogue
box:
To Next Page
Loading...
Need help?
General
