Patient Data Management
16-5
16.2.6 Quickly Saving Full Screen Image to the
System
This function can save the current full screen image to the system with image in scanning
mode.
1. Set the user-defined key through the path: [Setup] (by pressing <Setup>)→ [System
Preset]→ [Key Config]. Select a key in the Key Function page on the left side and
select “Send Full Screen Image to Local” in the Output page of Function field on the
right side.
2. After the setting, you can use the user-defined key to save full screen image to the
system in BMP format.
16.2.7 Thumbnails
The stored images or cineloops are displayed in the form of thumbnails on the screen:
z In the iStation screen, the thumbnails refer to the images stored for the selected
exam or the selected patient.
z In the scanning or freeze mode, the thumbnails refer to the images stored in the
current exam. You can click
or to turn the pages when there are more
than one page.
z In the Review screen, the thumbnails refer to the images stored in the same exam.
z When you move the cursor onto a thumbnail, its name and format will be
displayed.
16.2.8 Image Review and Analysis
You can review and analyze the stored images.
16.2.8.1 Review an Image
You can review all images stored in an exam, and send, delete or analyze the stored
images.
To enter Review:
z Press <Review> to enter Review screen. The system displays the images stored
in this exam of the current patient (if there is no current patient information, you
can review the images of the latest exam).
z Select an exam of a patient in the iStation screen, and press <Review> to enter
the Review screen to review the images of the patient. You can also select more
than one exam, and the system will display images of the lately exam images in
Review status.
The Review screen is shown as follows:
To Next Page
Loading...
Need help?
General
