Patient Data Management
16-14
16.5 Network Storage
Network storage is used to save image files and measurement reports to the remote PC
server.
16.5.1 Network Storage Setting
Open “[Setup]→[Network Preset]→[Network Storage]” to perform network storage
setting.
Name Description
Service Name Name of the device, cannot be empty
Destination
Device
Name of the device, cannot be empty
IP Address IP address of the network service device, cannot be empty
Ping You can ping other machines to verify connection after entering the
correct IP address. Also you can check the connection of the already
added server in the list.
User Name User name for entering the shared PC server, which is decided by the
server
Password Password for entering the shared PC server, which is decided by the
server
Shared Dir Shared folder directory, cannot be empty
Browse To enter the Net Disk Browse screen to set the shared folder
To Next Page
Loading...
Need help?
General
