Parameter Setup
17-7
z Add or delete an item
To add an item to the image menu, select an item in the Available Items box and
click
. This item will display in the image menu.
To delete an item from the image menu, select an item on the right side box and
click
. This item will disappear from the image menu.
To delete all items from the image menu, directly click
. All items will
disappear from the image menu.
z Change position of an item
To change position of an item, select the item in the right side box and click [Move
Up] or [Move Down].
Exit the [Soft-Key and Menu Preset] screen
Click [OK] to confirm the preset operations and exit the screen;
Click [Cancel] to cancel the preset operations and exit the screen.
17.9 Peripheral Setup
Click [Setup] key to show the Setup menu, and select [Peripheral] in the Setup menu to
open the [Peripheral Config] screen. The [Peripheral Config] screen is used to set up
printer, recorder and I/O configuration.
Set Up Printer
The settings of a printer include: set a printer, add a printer, change printer attribute, set
paper size and direction. See the figure below.
To Next Page
Loading...
