Image Recording
20-5
z Exiting DVR
Click [Exit] in the [DVR Record] menu to exit the DVR operation.
20.2.3 Record
Recording is to record videos/audios obtained from the examination and to store them
into DVD or hard disc of the DVR recorder.
îš„ Preparation before recording
1 Connect the DVR recorder to the ultrasound system and ensure the DVD disc is put
in the tray and there is adequate storage capacity in the hard disc.
2 The setting path is: Setup → Peripheral → Recorder; select [DVR] in the [Current
Record] drop-down list.
îš„ Basic Operations
1 Start the ultrasound exam and obtain images.
2.
To record,
z Click [Record] in the [DVR Record] menu. Or
z Press [Record] button on the DVR recorder control panel. Or
z Press [X] button on the remote control.
3.
To pause,
z Click [Pause] in the [DVR Record] menu. Or
z Press the [Pause] button on the DVR recorder control panel. Or
z Press [
] key on the remote control.
4.
To continue to record after pause,
Click [Record] item a second time in the [DVR Record] menu. See the following figure.
5.
To stop,
z Click [Stop] item in the [DVR Record] menu. Or
z Press [Stop] button on the DVR recorder control panel. Or
To Next Page
Loading...
Need help?
General
