Exam Types
9-4
to the Exam Selected.
2) Click to add the exams, which Exam Library has but Exam Selected
doesn’t have, from Exam Library to Exam Selected.
5
After the selected exam types are set, you can arrange the order of these exams. Select
the
and buttons to adjust the order of these exam types
one by one.
6
To set an exam type as a default exam type for a transducer:
a) first select the exam type,
b) then click .
7
Click to confirm the modified setup; or click to cancel the
modified setup.
9.3.2 Exam Configuration
The [Exam Config] screen is shown as follows:
After an exam type is selected,
1
Click
to change the name of the user-defined exam type,
2
Click
to copy the parameters of the selected exam type.
3
Click [Up] or [Down] to move the position of the exam mode.
To Next Page
Loading...
