Patient Data Management
16-21
2. Click [Add] to enter the following page.
3. Enter the user name (you are not allowed to enter the same name or modify the name
already exist).
4. Enter the password and the confirmed password (the password is consist of 6-16
characters)
5. Set the user role in the drop-down list: administrator or operator.
6. Click [OK] to confirm the setting and exit the dialogue box, then the new user will
appear on the User List.
16.10.4.2 Delete a User
Premise: you must log on the system as the system administrator. If not, the system
prompts that permission is denied.
1. Open the “Admin” page through the path: [Setup]→[System Preset]→[Admin].
To Next Page
Loading...
