Mindray DC-3

Probes and Biopsy
18-23
No. Name Description
<1> Support of
needle-guided
bracket
Used for installing the needle-guided bracket on the
probe.
<2> Groove and tab of
the needle-guided
bracket
Respectively matched with the tab and groove of the
probe.
<3> Angle adjusting
base
There are 3 types of angles available to be adjusted.
<4> Angle shift sign
(25°,35°,45°)
Matched with the biopsy angle (25°, 35°, and 45°).
<5> Angle pinch nut Used for fixing the angle block at a chosen angle.
<6> Angle block Used for fixing the angle block at a certain angle.
<7> Guiding block Used for installing biopsy needle; there are five
specifications of guiding blocks for different biopsy
needles.
<8> Specification of
guiding block (14G)
Matched with the corresponding biopsy needle (14G).
<9> Guiding hole of the
biopsy needle
Used for installing the biopsy needle.
<10> Pinch nut of
needle-guided
bracket
Used for locking the needle-guided bracket and the
probe.