System Introduction
4-2
（11)
（12)
（13)
（14)
No Name Function
<1> Monitor Displays the images and parameters during scanning
<2> Control panel Operator-system interface or control
<3> DVD-RW DVD-RW drive
<4> Power switch Used for turning on/off the power supply
<5> Video printer
compartment
Space reserved for B/W thermal printer
<6> Transducer ports Connect transducers to the main unit;
The leftmost port is the 4D transducer port.
<7> Casters Used for securing or moving the system
<8> Transducer &
ultrasound gel holder
Used for temporarily placing transducers and ultrasound gel
<9> Handle Used for pushing and moving the system
<10> ECG panel Used for connecting the ECG cable and footswitch, etc.
<11> Monitor support arm Used for support and adjustment of height and position of
LCD monitor.
<12> Table for placing
objects
Used for placing objects or devices
<13> I/O panel Interface panel for input and output signals
<14> Power panel Electrical interface panel
To Next Page
Loading...
Need help?
General
