12-10 DICOM
DICOM service setting for Worklist is described as follows:
Name Description
Device
After you set the server(s) in DICOM Server Setting screen, the
name(s) will appear in the drop-down list, select the name of the
Worklist server.
Service Name Default is xxx-Worklist, and it can be modified.
AE Title
Application Entity title, Here, it should be consistent with that of the
Worklist server.
Port
DICOM communication port, 104 by default. Here, the port should be
consistent with that of the Worklist server port.
Maximum Retries Reserved feature
Interval Time(Sec)
Reserved feature.
Timeout(Sec)
Refers to time after which the system will stop trying to establish a
connection to the service. Value: 5－60s, in increments of 5s, and 15
by default.
Scheduled Station
AE Title
To set the AE Title of the scheduled station. For example, if the AE
Title of the Worklist server is M7, then the scheduled station AE Title
here should be M7.
Add Click to add the Worklist service to the service list.
Cancel Click to cancel the parameter setting.
Update
Select an item in the service list, change the parameters in the above
area, and click [Update] to update the item in the service list.
Delete Click to delete the selected service in the service list.
To Next Page
Loading...
Need help?
General
