373
Kaleido-X
User’s Manual
4 If your logical sources include more text levels to be associated with the Zodiak
switcher, then repeat
step 2 – step 3 for the current logical source’s remaining text
levels.
5 Click a cell that corresponds to the appropriate alarm level of the current logical source.
6 In the filtered System list, navigate to the tally element you wish to monitor, and drag it
onto the selected cell.
7 If your logical sources include more alarm levels to be associated with the Zodiak
switcher, then repeat
step 5 – step 6 for the current logical source’s remaining alarm
levels.
8 Make corresponding assignments to other logical sources by incremental copy, if
desired (see
Making Further Assignments by Incremental Copy, on page 168).
9On the File menu, click Save.
Changes to the sources table are saved.
Configuring Layout Elements
You can now assign the logical sources you previously configured to monitors that can
display text (e.g. UMD) or alarms (e.g. UMD, video, text alarm status) in a layout. Depending
on your purposes, you will assign the appropriate text or alarm levels to specific
components within the monitors (e.g. assign an alarm level to tally components in an UMD,
or a text level to the UMD text component).
To configure layout elements for dynamic text and tally reporting
1Click the Layouts tab, and then open the layout you wish to configure.
Text level based on dynamic
labels from Zodiak sources
Alarm levels based on tallies
from the Zodiak device
To Next Page
Loading...
