CLUTCH –
Service Specifications /
Lubricants / On-vehicle Service
21-2
SERVICE SPECIFICATIONS
Items Standard value
Clutch pedal height mm 162.5 – 165.5
Clutch pedal clevis pin play mm 1 – 3
Clutch pedal free play mm 6 – 13
Distance between the clutch pedal and the toeboard when the clutch is disengaged mm 70 or more
LUBRICANTS
Items Specified lubricants Quantity
Clutch fluid MITSUBISHI genuine brake fluid “DIA-QUEEN
BRAKE FLUID SUPER 4”
As required
Push rod assembly Rubber grease
Boot
Release cylinder push rod MOLYKOT BR-2 PUS
ON-VEHICLE SERVICE
1. CLUTCH PEDAL INSPECTION AND
ADJUSTMENT
(1) Turn up the carpet, etc. under the clutch pedal.
(2) Measure the clutch pedal height.
Standard value (A): 162.5 – 165.5 mm
(3) If the height of the clutch pedal is outside the standard
value, loosen the lock nut and adjust the pedal height
to the standard value using the adjusting bolt.
Clutch pedal height
A
Setting nut
Adjusting bolt
Locking
nut
13 {1.3}
6 {0.6}
To Next Page
Loading...
Need help?
General
