Mitsubishi LANCER EVOLUTION-V 1998 User Manual

REAR AXLE – On-vehicle Service <Vehicles with AYC>
27-28
2-2 TORQUE TRANSFER MECHANISM
(1) Remove the filler plug.
(2) Check that the gear oil level is up to the bottom end
of the filler plug hole.
(3) If the gear oil level is lower than the bottom end of the
filler plug hole, add the specified gear oil up to the bottom
end of the filler plug hole.
Specified gear oil:
MITSUBISHI GENUINE DIA QUEEN SUPER AYC
FLUID
(4) Fit the filler plug and tighten it to the specified torque.
3. GEAR OIL CHANGE
3-1 DIFFERENTIAL
(1) Remove the drain plug to discharge the gear oil.
(2) Fit the drain plug and tighten it to the specified torque.
Tightening torque: 49 Nm {5.0 kgf@m}
(3) Remove the filler plug and add the specified gear oil
up to the bottom end of the filler plug hole.
Specified gear oil:
MITSUBISHI GENUINE DIA QUEEN SUPER
HYPOID GEAR OIL (GL-5)
Quantity used: 0.41 ± 0.02 dm
3
{0.41 ± 0.02 ȏ}
NOTE
10_C or more: #90, less than 10_C: #80
(4) Fit the filler plug and tighten it to the specified torque.
Filler plug
49 Nm {5.0 kgf@m}
Gear oil
Filler plug
49 Nm
{5.0 kgf@m}
Gear oil
Drain plug

Mitsubishi LANCER EVOLUTION-V 1998 Specifications

General

Brand	Mitsubishi
Model	LANCER EVOLUTION-V 1998
Category	Automobile
Language	English