Mitsubishi LANCER EVOLUTION-V 1998

Snap Rings, Spacers and Thrust Plates
for Adjustment / Torque Specifications
MANUAL TRANSMISSION
OVERHAUL
–
22B-9
Part name Part No.Identification symbolThickness mm
Spacer
(For adj stment of center differential case
1.19 L MD710456
(For adjustment of center differential case
preload)
1.22 G MD700271
p
1.25 M MD710457
1.28 N MD710458
1.31 E MD706574
Spacer
(For adj stment of center differential case pinion
0.6 – MD748362
(For adjustment of center differential case pinion
backlash)
0.7 – MD748363
0.8 – MD748364
0.9 – MD748365
1.0 – MD748366
1.1 – MD748367
TORQUE SPECIFICATIONS
TRANSMISSION
Items Nm {kgf@m}
Under cover mounting bolt 6.9 {0.7}
Interlock plate bolt 30 {3.1}
Clutch housing-transmission case mounting bolt 44 {4.5}
Clutch release bearing retainer mounting bolt 9.8 {1.0}
Control housing mounting bolt 18 {1.9}
Shift cable bracket mounting bolt 18 {1.9}
Speedometer gear mounting bolt 3.9 {0.4}
Stopper bracket mounting bolt 18 {1.9}
Select lever mounting bolt 18 {1.9}
Select lever mounting nut 11 {1.2}
Center differential drive gear mounting bolt 132 {13.5}
Back-up lamp switch 32 {3.3}
Poppet spring plug 32 {3.3}
Reverse idler gear shaft mounting bolt 48 {4.9}
Roll stopper bracket mounting bolt 69 {7.0}