Moons' MBDV Series - Drive Configuration

58
Rev. 2.0
07/27/2023
MBDV Hardware Manual
6.3 Drive Conguration
In order to integrate the MBDV drive and motor into a system, it is necessary for users to congure
the drive so that its inputs, outputs, feedback and motor interact with the system in the desired
way. The following are examples of things users can congure:
1. Control Mode
2. Assign functions to inputs and outputs
3. Tune PID loop parameters for improved motor control (if necessary)
Connection method
Install the setup software. Please go
to our website to download:
www.moons.com.cn
For detailed instructions of Luna, contact Applied Motion support..