MTE PTS 400.3 PLUS - Page 73

PTS 400.3 PLUS Operation Manual_R02 Page 73/306
Approval number
Approval number
Any alphanumerical approval identification, defined by customer, country of manufac-
turer, based on accepted type tests
Call Measure systems setup menu [6.5.1.1]
Enter Comments
Exit, back to calling menu
6.5.1.1 Measure systems setup
Measure systems setup menu
Up to four measure systems can be defined for one
meter type.
The names of the actual loaded data base object
files are shown at:
..
Measure system 1 .. 4
Indications / settings
..
Load / edit object files
The file selection menu [6.1] is called with the object file directory:
Measure System Selection
For description of actual measure system dataset see [6.5.1.2]
Exit, save actual settings, back to calling menu