NEC DSX - Page 95

Feature Key Assignments
OperationCode and DataDescriptionKey Type
While on a call, press key
to save the number you
25Use this option to assign
a Feature Key as a Save
Number Dialed key.
Sa
ve Number Dialed
just dialed. While idle,
press key to redial a
previously saved number.
There is no BLF for this key type.
Place or answer outside
call + Press key + Enter
26Use this option to assign
a Feature Key as an
Account Code key.
Account Code
Account Code + Press
key to return to call.
Busy Lamp Field (BLF)
Off: Not in Account Code mode or not entering Account Codes.
Fast Flash (green): In the Account Code entry mode.
On (green): On a call for which the user has entered an Account Code.
Press key instead of
pressing INTERCOM
and dialing *3.
27Use this option to assign
a Feature Key as a Call
Forwarding key.
Call Forwarding
Busy Lamp Field (BLF)
Off: Extension not call forwarded or in the Call Forwarding setup mode.
Fast Flash: In the Call Forwarding setup mode.
Wink Off: Extension has Call Forwarding enabled.
Press key to enable or
disable headset mode.
28Use this option to assign
a Feature Key as a
Headset key.
Headset
Busy Lamp Field (BLF)
Off: Extension is not in the headset mode.
On: Extension is in the headset mode.
Press key to place or
answer an Intercom call.
29Use this option to assign
a Feature Key as an
Intercom key.
Intercom
Busy Lamp Field (BLF)
Off: Intercom is idle.
Slow Flash (green): Incoming Intercom call ringing.
Double Wink On (green): Intercom call on Hold.
On (green): Busy on an Intercom call.
Press key to initiate a
Flash.
30Use this option to assign
a Feature Key as a Flash
key.
Flash
There is no BLF for this key type.
DSX | Features | 95
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/