110 User Manual Version 3.1
Protocol
code
Display message Cause
005 INCREASE THE GAP! Ok TO
CONTINUE!
CODE: 05
Gap between two products is too
small or malfunction of paper
sensor
Elimination
• Check separation system
• Check if the feeding
components are worn
Printer with separate feeder:
• Decrease the speed of the
feeding system
Pos: 79.6 /Bedienungsan leitungen/Geräte s pezifisch/Druc ker/Error Messages/09_P RINTING_ERROR_REPEA T_LAST_ADDRESS @ 2\mod_126 5617707328_912.doc @ 11296 @
Protocol
code
Display message Cause
009 PRINTING ERROR REPEAT LAST
ADDRESS.
CODE: 09
Printer internal error detected
Elimination
• Check if the last printed pages
were printed correctly
• Reprint any faulty pages
using the REPEAT PAGES
feature from the Quick
menu
Pos: 79.7 /Bedienungsan leitungen/Geräte s pezifisch/Druc ker/Error Messages/10c_ HEAD_MOVEMENT_ERROR_S huttle_Head @ 2\mod_1265 617751987_912.doc @ 11299 @
Protocol
code
Display message Cause
010 HEAD MOVEMENT ERROR OPEN
SAFETY COVER
CODE: 10
The movement of the head
(carriage holding the cartridge) is
rough-running
Elimination
Note at which position the head
stops before opening the cover!
• Check if the head carriage is
jammed (e.g. by a dog-ear in
the paper)
• Check if the green cartridge
lever is closed
• Check if the head carriage is
running smoothly over the
whole movement range
• Check if the white print head
cable is damaged
• Check if the ruler behind the
head carriage is in the
correct position
• Check if the ruler is clean
• Check if the transport bars
are clean
• Check if the black o-rings are
in the most outer position
Pos: 79.8 /Bedienungsan leitungen/Geräte s pezifisch/Druc ker/Error Messages/12_ No_INK!!_U#_C# @ 2\mod_1 265618218243_912.doc @ 11311 @
To Next Page
Loading...
