Protocol
code
Display message Cause
012 NO INK !! CHANGE CARTRIDGE
CODE: 12
Ink level counter has reached the
set empty level
Elimination
• Insert a new ink cartridge and
reset the ink level counter
Pos: 79.9 /Bedienungsan leitungen/Geräte s pezifisch/Druc ker/Error Messages/13_C HECKSUM_ERROR_! @ 2\mod_1 265618265761_912 .doc @ 11314 @
Protocol
code
Display message Cause
013 CHECKSUM ERROR ! MAKE
DEFAULT RESET
CODE: 13
Error in buffered RAM
Elimination
• Perform a default reset • If the error occurs again after
the default reset call service
Pos: 79.10 /Bedienungsan leitungen/Gerät e spezifisch/Dr ucker/Error Messages/ 14_CHECKSUM_ERROR_! @ 2\ mod_1265896733283_91 2.doc @ 11938 @
Protocol
code
Display message Cause
014 CHECKSUM ERROR ! MAKE
COUNTER RESET
CODE: 14
Error in buffered RAM
Elimination
• Perform a default reset • If the error occurs again after
the default reset call service
Pos: 79.11 /Bedienungsan leitungen/Gerät e spezifisch/Dr ucker/Error Messages/ 15_CHECKSUM_ERROR_! @ 2\ mod_1265896765800_91 2.doc @ 11962 @
Protocol
code
Display message Cause
015 CHECKSUM ERROR ! TESTMACRO
RESET
CODE: 15
Error in buffered RAM
Elimination
• Perform a default reset • If the error occurs again after
the default reset call service
os: 79.12 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Error Messages/16_C HECKSUM_ERROR_! @ 2\mod_ 1265896768206_912 .doc @ 11966 @
Protocol
code
Display message Cause
016 CHECKSUM ERROR ! SETTING
RESET
CODE: 16
Error in buffered RAM
Elimination
• Perform a default reset • If the error occurs again after
the default reset call service
Pos: 79.13 /Bedienungsan leitungen/Gerät e spezifisch/Dr ucker/Error Messages/ 17_CHECKSUM_ERROR_! @ 2\ mod_1265896783800_91 2.doc @ 11970 @